SDX Closing Wheel Arm Update Kit

The closing wheel arm is responsible for holding the closing wheel in the correct position and with proper down force to ensure good trench closure and soil-to-seed contact.  The OEM closing wheel arm lacks seals to keep out dirt and prevent rust, resulting in pivots that become stiff or stuck.  Red E’s high performance closing arm update kit uses a bolt-through design with precision ground pins and added seals for longer life and a consistent fit.  The closing wheel bearing is moved from the wheel into the arm to get the bearing out of the dirt and allows more options for closing wheel types.

For More Information

Part Number: SDX-K01

  • Upgraded bolt-through design with a precision ground and hardened pivot pin, greaseless poly bushings and added seals
    • Flange lock nut and shims remove side-to-side slop
    • Grade 8 bolt for serviceability and pivot strength
    • Greaseless poly bushings outlast OEM
  • Closing wheel bearing moved from wheel into the arm allowing a larger, double-row bearing which is better protected from the dirt
    • Rubber closing wheel replaced with solid-cast or spiked closing wheel for increased durability and more aftermarket options

Specs

For Case-IH SDX Series no-till drills

Replaces Case-IH P/N: 85700693, 306146A1, 413-10176, 306239A1, 438-22432, 86523224, 87367

You may also like…