SDX Main Opener Mount
OEM main opener pivots fill with dirt and rust, get stiff and eventually seize completely. As the main opener pin seizes inside of the main opener arm, it tears the flag tab off of the pin and the pin begins rotating within the mount rather than the arm pivoting on the pin. This causes the holes in the mount to elongate and deform, and if left long enough, will destroy the mount.
$115.00
SKU: RE3029
- Our main opener mounts are the same as OEM, but with larger pivot pin holes to accept spring bushings (sold separately – included in SDX-K03)
- Removes slop caused by main opener pin seizing in the main opener arm
Additional information
| Weight | 12.25 lbs |
|---|---|
| Dimensions | 12.0 × 6.0 × 4.5 in |
Specs
For Case IH SDX Series no-till drills
Replaces Case IH P/N: 328011A1
English 
Russian