RU 
EN 
18-5/8″ JD Ingersoll Hi-Hard Opener Disc
The Cutting Disc is responsible for cutting through residue and opening the seed trench. It works in tandem with the seed boot and gauge wheel to deliver and precisely place the seed at the correct depth. Worn discs do not cut properly and may push residue into the trench causing degraded seed-to-soil contact. Worn discs also cause excessive wear to the seed boots as they ride in the shallower trench, leading to poor seed placement and greatly reduced seed boot life. Red E’s exclusive USA and Canada made Ingersoll Hi-Hard double bevel razor edge extended wear no-till disc maximizes both longevity and sharpness.
$53.00
PRODUCT INFORMATION (CALL OR TEXT)
Описание
SKU: RE6001RZR
- New Ingersoll Hi-Hard discs utilize advanced heat-treating processes to achieve some of the hardest discs in the industry
- The 18-5/8″ diameter coupled with higher grade steel and hardness can last over 50% longer than standard 18″ competing discs
- High hardness material helps retain a sharp cutting edge to ensure accurate seed placement
- Discs should be replaced when disc diameter becomes less than 17″
- Made in USA and Canada and available exclusively through Red E
- Ships to the US & Canada, see additional Canadian shipping terms
For use on all John Deere 50, 60, 90, & Pro Series Air Drills, including:
750, 1560, 1590, 1690, 1850, 1860, 1890, 1890 CCS, 1895, 1990 & 1835 SFP Air Hoe, N500, N500F & H500F
*NOT COMPATABLE WITH THE NEW PRO-SERIES SFP NH3 SCRAPERS
REPLACES:
- John Deere part numbers: N214190, N283804
- Interchange part numbers: N283804, 133480A1, 845-P18507, P18197JDD, 458008, N458008, N 458008, CL4925, AG283804, 18X5JD750, N214190, P18507, NA18 FDN
- Wearparts part numbers: N283804BA
- Exapta part numbers: J 5070
- Shoup part numbers: SH314190
- CNH part number: 113480A1
- Bourgault Tillage Tools (BTT) part number: 500-200-1010
Part of our lineup of John Deere No-till Discs.
Keywords: Disc Blades Opener Blades Disc Openers Disk blades
Детали
| Вес | 13.72 фунт |
|---|---|
| Габариты | 18.5 × 18.5 × 0.19 дюйм |
Q: How does this compare to my OEM blade?
A: 18-5/8″ JD Ingersoll Hi-Hard Opener Disc is not only made of the same Extended wear material as our 18″ Hi Hard blade, but is also 5/8 ” extra diameter. This gives you 62% more wear and up to 80% more blade life vs. OEM.
Q: How does the Bevel compare to an 18″ blade?
A: The 18-5/8″ JD Ingersoll Hi-Hard Opener Disc has a compound bevel that, as the disc wears, helps it to keep a sharp profile down to 17″.
Q: When should I replace my discs?
A: Your discs should be replaced when they become dull and before or at 17″”. In addition to vastly reduced cut quality, affecting depth and stand, at 17″ in diameter, your boot is exposed to the soil, and wear accelerates exponentially.
Q: How long does this disc last?
A: This blade is not only made of an extended wear material but also has an extra 5/8″ in diameter. This can lead to an additional 80% life span vs an OEM 18″ blade!
Q: What is the cost difference between this blade and OEM?
A: The blade cost is slightly increased vs OEM with a much higher value proposition!
Q: Where does this blade fall in Red E’s Lineup?
A: The 18-5/8″ JD Ingersoll Hi-Hard Opener Disc is a premium blade meant to help keep you in the field longer, while improving your yield, and helping your bottom line with only a 8% increase compared to our 18″ extended wear blade, you can get up to 80% additional life than an OEM blade!
Q: What drills does this blade fit?
A: It is made to fit any JD 50 series, 60 series, 90 series, or Pro series air seeders and drills except on SFP rows with John Deere’s Pro series sealer wing for NH3.
Q: What conditions does this disc do well in?
A: This disc performs in all except the most dense of field debris.
