EN 
RU 
Stainless Steel Venturi Double Shoot 3″ Manifold Assembly
The Romafa stainless steel manifold assembly is designed for years of trouble-free seeding. No sliding gates that need to be cycled regularly to keep them useable. Larger openings at the top to prevent bridging. Just slide in the insert for feeding the top or bottom shoot and you are good to go. The Romafa manifold assembly gives you all the components for below meter housing in one package.
Fits John Deere 1910, C650, C850 Air Carts with 3-inch primary tubes.
For carts with 2.5-inch primary tubes go here:
Stainless Steel Venturi 2.5″ Double Shoot Manifold Assembly
Components include:
- Stainless steel manifold
- Seal (meter housing to manifold)
- Couplers & clamps to connect the tubes to the manifold
- Stainless steel mounting hardware
- 8 pipe end caps to plug run on the 6-run setups
Top Shoot & Bottom Shoot inserts SOLD SEPARATELY, allowing you to configure your cart according to your needs.
COMPATIBILITY NOTES:
- Compatible with OEM John Deere meter housings—however, the bottom of the lower plastic inserts will need to be trimmed slightly.
- If installed on a green-colored OEM John Deere meter housing, this Meter Housing Seal is required.
Note: Always use anti-seize on threads of stainless steel hardware.
$3,274.41
PRODUCT INFORMATION (CALL OR TEXT)
Description
SKU: JAS4760A (Tow-Between), JAS4757A (Tow-Behind)
- Fits John Deere 1910, C650, C850 Air Carts with 3-inch primary tubes (2.5-inch version also available)
- Full venturi
- Top Shoot & Bottom Shoot inserts SOLD SEPARATELY
- Simple and complete stainless replacement option
- OEM slide selector system is eliminated
- All necessary manifold seals, tube couplers, hose clamps, and stainless steel hardware included
- Includes lower assembly, 32 hose couplers, 64 hose clamps, 8 vinyl caps, seals, stainless steel mounting hardware, and tank pressurization kit
- Compatible with aftermarket stainless and OEM John Deere meter housings
- Made in Canada by Romafa Metal Works, Inc.
- NOTE: This option is compatible with OEM John Deere meter housings; however, the bottom of the lower plastic inserts will need to be trimmed slightly
- NOTE: If installed on a green-colored OEM John Deere meter housing, this Meter Housing Seal is required
INSTALLATION INSTRUCTIONS
Note: Always use anti-seize on threads of stainless steel hardware.
Keyword: JAS47 JAS476 JAS475 4760 4757
Additional information
| Weight | 93 lbs |
|---|---|
| Dimensions | 45.5 × 13 × 11 in |
| Tank Orientation | Tow-behind, Tow-between |
