Pro-Stitch

Close the Gap to Higher Yields

Contact Us to Become a Dealer!

БЕСПЛАТНАЯ ДОСТАВКА!
Pro-Stitch Planter Closing Wheels PSP750 PSP-K01
БЕСПЛАТНАЯ ДОСТАВКА!
Pro-Stitch Seed Boot Stabilizer AG-K07-ST
БЕСПЛАТНАЯ ДОСТАВКА!
БЕСПЛАТНАЯ ДОСТАВКА!
БЕСПЛАТНАЯ ДОСТАВКА!
Bonilla Seed Tab AG-K05-FIN

Имеются в наличии запчасти для сеялок марок Джон Дир, Case IH, White@Kinze

Pro-Stitch Ag

После многих лет работы по технологии нулевой обработки почвы и тестирования множества различных идей, борьбы с влажной и сырой почвой, разработчики Pro-Stitch не увидели иного выбора, кроме как предложить собственное решение. Им требовалось заделочное колесо, которое могло бы работать при всех севооборотах и ​​почвенных условиях, от влажных низинных участков до сухих вершин холмов. После того, как был найден правильный контур давления на грунт, который мог бы сделать все это, не вызывая уплотнений стенок борозды, пришло время разработки нового изделия. В конце концов, после 5-и лет проб и ошибок было разработано колесо, которое плотно прижимало почву к семенам, уменьшало уплотнение боковых стенок борозды, сшивало шов и работало при минимальном давлении при любых полевых условиях. Заделочное колесо Pro-Stitch отлично работает как в самых суровых, так и в идеальных условиях. Колеса Pro-Stitch рекомендуется устанавливать в шахматном порядке (одно впереди другого) на расстоянии от 1 3/4 дюйма до 2 1/4 дюйма в нижней части колес. Колеса Pro-Stitch движутся с запаздыванием из-за давления почвы, создавая идеальный «эффект стежка». Конструкция с «тупым» зубом обеспечивает в 6 раз большее давление на боковую стенку борозды по сравнению со стандартными круглыми заделочными колесами, что снижает уплотнение боковых стенок борозды за счет их разрушения и смещения.

Pro-Stitch Closing Wheels on planter
Free Shipping!

Заделочные колёса Pro-Stitch для сеялок точного высева

Артикул : PSP750
Available for John Deere, Case IH, White & Kinze

Featuring our patented footprint, with a proven yield advantage! Pro-Stitch wheels are recommended to be mounted staggered (one ahead of the other) & 1- 3/4" - 2- 1/4"apart on the bottom of the wheels. The lightest setting is recommended for most soil conditions. Pro-Stitch wheels run out of time due to soil pressure, creating the perfect Stitch effect while reducing sidewall compaction by fracturing & pushing the seed slot from side to side.

Pro-Stitch Closing Wheels on planter
Free Shipping!

Заделочные колёса сеялки Джон Дир

Артикул : PSD100JD
для сеялок Джон Дир 60 & 90 серий

Featuring all the benefits of the planter closing wheel, plus it'll greatly reduce closing wheel bounce commonly seen in drills. Material is 10 times more abrasive resistant than steel and includes a replaceable OEM bearing and SS flange.

Pro-Stitch Drill Closing Wheels on John Deere 60 and 90 Series planters

Заделочные колёса сеялки Case IH

Артикул : PSD100
для сеялки Case IH PD500 & SDX серий

Наши заделочные колеса изготовлены из сверхвысокомолекулярного материала, который в 10 раз более устойчив к абразиву, чем сталь, не разрушаются, они не ломаются, как оригинальные колеса. Вы не можете закрыть семенную борозду? Этот комплект окажет значительную помощь.

Pro-Stitch Drill Closing Wheels on Case IH PD500 & SDX Series planters

John Deere Seed Boot Stabilizer

Для сеялок марки Джон Дир
Product #: AG-K07-ST (50, 60 & 90 Series)

The Pro-Stitch seed boot stabilizers are made of high-strength steel and precisely machined to fit snug between the two flanges where the seed boot mounts, adding a precise mounting hole to take away the slack. No drilling is required for this simple installation. (see video) All hardware is included plus a new mounting bolt.

Pro-Stitch Seed Boot Stabilizer AG-K07-ST
Free Shipping!

Семяотражающий язычок Bonilla

Product #: AG-K05-FIN-RH (Right) & AG-K05-FIN-LH (Left)

Bonilla Seed Tab is a must-have for precise seed placement! It is designed to follow the seed furrow precisely to keep the seed from blowing out of the furrow plus it acts as a seed firmer for better seed-to-soil contact.

Bonilla SeedTab

As farmers ourselves, we had a tough time closing the seed slot in tough planting conditions! After several years of trial and error, we knew we were on to something when the half our corn planted with the prototype wheels had a much nicer stand and the emergence was very obvious.

У одного из наших соседей они тоже были на испытании в первый год.

Он вернулся через неделю и сказал: «Я впечатлен колесами и их характеристиками! У меня даже есть название для них -« Pro Stitch! », потому что они так и делают:« зашивают прорезь! », - сказал он. Они до сих пор оправдывают свое название!

First of all, the planter setup is most important! It is recommended to install the wheels in the staggered position (one in the front & one in the back hole) 1 1/2" - 1 3/4" apart on the bottom of wheels (normally a 7/8" spacer is required). When set up this way, it hits the furrow closer to the bottom, firmly tucking the seed in place while leaving the top of the furrow looser.

Minimum down pressure setting is optimal in most planting conditions!

It is recommended to install the closing wheels as a pair to achieve that perfect stitch! In addition to achieving this, the Pro-Stitch closing wheel is taller than most closing wheels (13" vs. 12") to get a longer life out of each set of wheels.

Absolutely not! They are virtually indestructible... if in doubt, test them by taking a sledge hammer to them!

Our bearings come with a 2 Year Warranty and replacements can be bought from us direct at a competitive price as compared to a John Deere, Kinze & White Dealers.

These wheels were created to be the ideal setup for anything from wet, tough planting to perfect planting condition. As stated earlier, these wheels were created as a solution to tough planting conditions - which is where they truly shine based off of customer feedback.

Original prototypes showed there was a problem with counteracting these barriers. However, after testing a few options, there is an ejector (the small protrusion between the spikes) that effectively handles any roots or stalks that try to get caught between the spokes.

Absolutely not!

It is incredibly important to follow the recommendation of installing the wheels in a staggered position and 1 1/2" to 2" apart on the bottom to allow the wheels to naturally interlock and gently stitch the furrow, while also eliminating any air pockets.

Red E supplies farmers with John Deere aftermarket parts, including for the John Deere 1560, John Deere 1590, John Deere 1690, John Deere 1850, John Deere 1860, John Deere 1890, John Deere 1895, John Deere 1990, John Deere 1990, John Deere 1890CCS, and John Deere ProSeries.  Your John Deere drill can be outfitted with replacement parts to make it like new again.  Select the parts that fit your John Deere air seeder model.  We also supply ag parts for Air Carts, Air Drills, Case IH, CaseIH SDX, Air Carts, Bourgault, Ezee-On, Flexi-Coil, Flexicoil, Horsch, Horsch Anderson, Morris, Poly Tank, and Seed Hawk.